How to apply Protection Bike Skin Pro Kits


Recommendation for preparation before applying

Prepare a whole place before starting, no matter where you are, but this is your moment, put on music, a video (wear headphones so they don’t bother you) or anything that lets you enjoy the moment alone you have with your bike.

  1. Clean the surface of the bicycle that looks like someone who is in love came to buy it for you
  2. Find a place where you will apply Protection Bike: you will wet the floor, you will throw papers on the ground, you will move around the bike.
  3. Have a clean table nearby to keep my product of the highest quality that you can find in the market for a fraction of the price, respect me, do not tell me later that the product has bubbles or hairs, sand, it does not adhere. That I already know that it does not happen, if you do it well.
  4. It would be nice if you remove the wheels and chain, but in doing so don’t get the surface dirty with grease, oil, Teflon, or whatever you use as a lubricant.
  5. Clean the bike again, I know you made the bike dirty since you did all of the above. When looking at it from various angles, it has to shine evenly
  6. Fix the bike so that it does not move on a bike stand, but if you do not have it yet (but you want it), protect the components of the handlebar and the seat, and put it upside down, for the lower and rear protections, It will also help you to see where the stones or obstacles hit you.
  7. Make sure the bike doesn’t move, or you’re going to yell rude words, and I don’t want you to mention my mother

* No animal, person or alien participated or were injured to produce this product.

* Some of the descriptions may not be true to make the product more interesting.

* It can be applied dry, but the finish is not always the same.

Application recommendations (yes, recommendations, because the kit is yours, and you apply it as you want)

Only now are you going to start installing these things @ProtectionBike, don’t forget to follow me on social media, sometimes I get creative and give things away.

  1. Open the package, if you opened it before, make sure to clean something that is stuck by static or leaving it on the ground.
  2. Study each of the PRE-CUT pieces I made you, there are the suggestions for using the protections, you have to know what you are doing, this is not the time to improvise.
  3. Now, to install, read this in full before proceeding, and wash your hands!
    1. On the bike perfectly clean, place almost touching the bike, when you be pretty sure, in one of the sides, start for the middle, and with a finger runs the whole piece, then one side at the time, squeeze it from the middle to the edge.
    2. Some extensions pieces per zone have a number, this numbers are the recommendation to follow the pattern od the design to looks better.
      Put the extensions one after the other very close
    3. If your bike force you to cut some pieces, cut it out of the bike
    4. Picture your Bike is and tag me!

Now that you are happy to have done this, proud of yourself, and with a huge desire to go to show what we did and show off your protection with or without designs, order everything that is not in its place, so that they give you permission to go rolling and nobody put problems

We are in

Get update, promotion and more

Shopping Cart0
There are no products
Continue viewing