Protection Bike Cleaners Line

 

StepOne

  1. Remove all the mud that may be stuck to the different areas of the bicycle with water.
  2. Spray directly on the chain, and on the components that have contact there and wait 30 seconds
  3. Re-spray the same areas, using the brush to remove any stuck-on dirt.
  4. Rinse and if you still see dirt, repeat the same steps until completely clean.

StepTwo

  1. Remove all the mud that may be stuck to the different areas of the bicycle with water.
  2. Spray Step Two all over the bike.
    1. If you have a foam cannon, the product can be used directly in the powerwasher bottles.
    2. If you are using Step Two Refill, you must use 8 ounces in a 32 ounce bottle topped off with water.
  3. Use our microfiber cloth to touch the whole body of your bike, so that no corner is left untouched
  4. Rinse and check that the suds have washed away all that fun dirt

Step Three

  1. Once your chain is clean and dry, support it where it allows you to move the pedals
  2. Find the chain link, and apply one drop per link to the entire chain
  3. At the end for a napkin to dry the excess

Step Four Forever New

  1. Apply Forever New on a black cloth with our Protection Bike logo in gold
  2. Start with the frame, then moving parts, pedals and bolts, and finish with the wheels.
  3. Keep in mind not to touch the discs and brake pads so as not to contaminate them
  • Glossy finish, let dry with direct application from the bottle
  • Satin finish, remove excess with the same damp cloth
  • Matte finishes, remove excess with a dry cloth

We are in
Contact

Get update, promotion and more

Shopping Cart0
There are no products
Continue viewing
0